Cisco Systems v1.0 Manual De Usuario

 

165 - 165 IP Telephony v1.0 Command List:  

 

 

 

 

Copyright 

© 2005, Cisco Systems, Inc. 

 

archive tar /xtract source 
destination 

Extracts the contents of a tar to the destination specified 

auto assign 2 to 2 

Turns on auto registration and configuration of new ephone-dns 

button 1:1 

Assigns an ephone-dn to a line on the ephone 

Enters global configuration mode 

copy source destination 

  

Creates XML files for configuring the IP Phones 

default-router 10.X0.0.1 

Sets the default gateway that will be assigned to the DHCP clients 

Enter privilege executive mode 

enable password cisco 

Assigns a password to enter privilege exec mode 

ephone 1 

Enters and creates an ephone 

ephone-dn 1 dual-line 

Enters and creates a ephone-dn 

Goes back one configuration level 

hostname name 

Assigns a host name to the router 

interface fa 0/0 

Enters FastEthernet 0/0 configuration mode 

Sets the IP address on the FastEthernet 0/0 interface 

ip dhcp excluded-address 
10.X0.0.1 10.X0.0.10 

Sets a range of address to be excluded from the DHCP pool 

ip dhcp pool CMEX 

Defines a DHCP pool and enters a DHCP pool mode 

ip source-address 10.X0.0.1 port 
2000 

Sets the interface where Cisco CallManager Express will listen for 
skinny messages 

keepalive 10 

Sets the keep alive to 10 seconds 

line vty 0 4 

Enters line mode 

load 7960-7940 P00303020214 

Loads the firmware and will use it for the 7960 and 7940 IP phones 

Enables logins on vty connections 

mac H.H.H 

Associates a physical device to an ephone 

Sets the maximum ephone-dn that can be present 

Sets the maximum ephones that can be present 

name John Smith 

Assigns a name to the ephone-dn 

network 10.0.0.0 

Runs eigrp on all interfaces with a 10.0.0.0 network assigned to it 

network 10.X0.0.0 255.255.255.0 

Enters a network range and subnet mask to use to assign 
addresses and mask to the DHCP clients 

Enables the interface 

Clears the Call Manager Express configuration 

number X000 

Assigns a directory number to the ephone-dn 

option 150 ip 10.X0.0.1 

Set the TFTP server that will be assigned to the DHCP clients 

password cisco 

Sets a password of cisco on the vtys 

router eigrp 100 

Starts eigrp with an AS of 100 

Shows the contents of the flash 

Show the current configuration that is loaded and running in RAM 
on the router 

Enters the setup utility 

type 7960 

Assign a model of IP phone to the ephone