Cisco Systems 7975G Manual De Usuario

There are different ways to choose items on your phone’s screen.

Use only a soft, dry cloth to wipe the touchscreen. Do not use any liquids or powders on the phone, 
because they can contaminate phone components and cause failures. 

Use the Display button 

 to disable and enable the touchscreen for cleaning. The Display button 

illuminates to indicate changes in touchscreen status:

 Green, steady—Touchscreen is in power save mode

 Green, flashing—Touchscreen is disabled

By touch

 

(Cisco Unified 
IP Phone 7975G, 
7971G-GE, and 
7970G only)

Press (or tap) touch-sensitive items on the touchscreen with your fingertip. 

Use only your fingertip to press the touchscreen, as using any other objects 
could damage the display. Be aware that pressing a phone number can cause the 
phone to dial the number.

By item number

Press the corresponding number on your keypad. For example, press 4 to 
choose the fourth item in a menu. 

By scrolling

Use the Navigation button to highlight an item. Press the Select button to select 
the item, or a softkey to finish the action.

Disable the touchscreen 
for cleaning

Press 

 and hold for more than one second. 

 flashes.

The screen remains disabled for about a minute, unless you enable it.

Enable the touchscreen 
(after disabling it)

Press 

 (flashing) and hold for more than one second.

Wake the touchscreen 
from power save mode

Press the touchscreen or any button, or lift the handset.

After a period of inactivity (determined by your system administrator), 
the touchscreen enters the power save mode to save power. In this mode, 
the touchscreen appears blank and the Display button 

 remains lit.