Cisco Systems 7975G Manual De Usuario

If you use AutoAnswer, see 

.

Cisco Unified IP Phones 7975G, 7965G, and 7945G support wireless headsets. Refer to the wireless 
headset documentation for information about using the wireless headset’s remote features. Also, check 
with your system administrator to be sure your phone is enabled to use a wireless headset with the 
wireless headset remote hookswitch control feature.

If you use a headset that supports wideband, you may experience improved audio sensitivity if you 
enable the wideband setting on your phone (this setting is disabled by default). To access the setting, 
choose 

 > User Preferences > Audio Preferences > Wideband Headset.

If the Wideband Headset setting shows as dimmed, then this setting is not user controllable.

Check with your system administrator to be sure your phone system is configured to use wideband. If 
the system is not configured for wideband, you may not detect any additional audio sensitivity even 
when using a wideband headset. To learn more about your headset, refer to the headset documentation 
or ask your system administrator for assistance.

Many of the actions you can take to dial a number or answer a call will automatically trigger 
speakerphone mode, assuming that the handset is in its cradle and 

 is not lit.

Toggle speakerphone mode on 
or off

 Press 

. 

Switch to a handset

Lift the handset. 

Adjust the volume level for 
a call

Press 

 during a call or after invoking a dial tone.

Press Save to preserve the volume level for future calls.