Cisco Systems VG202XM Manual De Usuario

4-8

Cisco VG202, Cisco VG202XM, Cisco VG204, and Cisco VG204XM Voice Gateways Software Configuration Guide

OL-16191-01

Chapter 4 Configuring Voice

Configuring the Voice Interface for Cisco Unified Communications Manager

20.

dial-peer voice tags pots

21.

service stcapp

22.

port port-number

23.

exit

DETAILED STEPS

Command or Action

Purpose

Step 1

enable

Example:

VG# enable

Enters privileged EXEC mode.

Step 2

configure terminal

Example:

VG# configure terminal

Enters global configuration mode. You have entered
global configuration mode when the prompt changes to

VG(config)#.

Step 3

stcapp ccm-group

group-id

Example:

VG(config)# stcapp ccm-group 1

Configures the CUCM group number for use by the
SCCP Telephony Control Application (STCAPP).

Step 4

stcapp

Example:

VG(config)# stcapp

Enables STCAPP.

Step 5

stcapp feature access-code

Example:

VG(config)# stcapp feature access-code

Enables STC application feature access codes and enters
their configuration mode.

Step 6

stcapp feature speed-dial

Example:

VG(config)# stcapp feature speed-dial

Enables STC application feature speed-dial codes and
enters their configuration mode.

Step 7

voice-port

slot-number/port

Example:

VG(config)# voice-port 0/0

Enters voice-port configuration mode.

Step 8

timeouts initial

seconds

Example:

VG(config-voiceport)# timeouts initial 60

Configures the initial digit timeout value for a specified
voice port.

Step 9

timeouts interdigit

seconds

Example:

VG(config)# timeouts interdigit 60

Configures the interdigit timeout value for a specified
voice port.