Cisco Systems VG204 Manual De Usuario

This chapter describes how to use the setup command to configure your voice gateway. The setup 
command prompts you to enter information needed to start a voice gateway functioning quickly. The 
facility steps you through a basic configuration, including LAN interfaces.

The Cisco VG202, Cisco VG202XM, Cisco VG204, and Cisco VG204XM voice gateways ship with a 
default configuration. During the first boot up, the voice gateways do not enter setup mode and are 
configured through auto-configuration.

If you prefer to configure the voice gateway manually or if you wish to configure a module or interface 
that is not included in the setup command, proceed to “

 for step-by-step instructions.

If you prefer to configure the voice gateway using AutoInstall, see 

.

Set up the hardware as described in the 

Configure your PC terminal emulation program for 9600 baud, 8 data bits, no parity, and 1 stop bit.

Determine which network protocols you support.