Cisco Systems 7690 Manual De Usuario

Descargar
Página de 150
 
4-3
Cisco IP Phone Administration Guide for Cisco CallManager 3.2, Cisco IP Phones 7960/7940/7910
78-10453-04
Chapter 4      Adding the Cisco IP Phone 7914 Expansion Module
Installing the 7914 Expansion Module
Each Footstand Kit contains:
One support bar (single with one thumb screw, or double with two thumb 
screws)
One footstand
Additional Equipment
You will need to have the following additional equipment.
Small flat head screwdriver—for use during the installation
Power supply unit—depending on how many Expansion Modules you are 
installing and how your Cisco IP Phone 7960 is powered, you will require 
power supply unit(s) as follows:
Safety Notices
These are the safety considerations for using the 7914 Expansion Module. Read 
these notices before you install or use the 7914 Expansion Module.
Warning
This warning symbol means danger. You are in a situation that could cause 
bodily injury. Before you work on any equipment, be aware of the hazards 
involved with electrical circuitry and be familiar with standard practices for 
preventing accidents.
Warning
Read the installation instructions before you connect the system to its power 
source. 
Power over the Ethernet to your 
Cisco IP Phone 7960
With one or two Expansion Modules, you need a power supply 
unit (separate orderable item).
Local power to your 
Cisco IP Phone 7960
With one Expansion Module, no power supply unit needed.
With two Expansion Modules, you need a power supply unit 
(separate orderable item).
Note
Use of a non-Cisco certified power supply unit may not work and will void the 
7914 Expansion Module product warranty.