Cisco Systems 7690 Manual De Usuario
5-21
Cisco IP Phone Administration Guide for Cisco CallManager 3.2, Cisco IP Phones 7960/7940/7910
78-10453-04
Chapter 5 Configuring Network Settings on the Cisco IP Phone
Configuring TFTP Options
Step 8
Press Validate.
Step 9
Press Save.
Cisco IP Phone 7910
Procedure
Step 1
Press settings.
Step 2
Press 6 (Network Configuration).
Step 3
Use the down volume key to select Admin VLAN ID setting.
Step 4
Press * to edit.
Step 5
Use the buttons on the dial pad to enter the new Admin VLAN ID, using the down
arrow to backspace.
arrow to backspace.
Step 6
Press # to save.
Configuring TFTP Options
If you do not use DHCP to direct the Cisco IP Phone 7960 to a TFTP server, you
must manually assign one. You can also assign an alternative TFTP server to use
instead of the one assigned by DHCP.
must manually assign one. You can also assign an alternative TFTP server to use
instead of the one assigned by DHCP.
This section covers these topics:
•
•
Assigning a TFTP Sever
The default TFTP server is set to CiscoCM1. If you are not using DHCP in your
network, and you want to change this setting, you must manually assign the TFTP
server to the phone.
network, and you want to change this setting, you must manually assign the TFTP
server to the phone.