Cisco Systems EGW 2200 Manual De Usuario

Test the integration. See the 

.

If this integration is a second or subsequent integration, add the applicable new user templates for 
the new phone system. See the 

.

Use the following task list to make changes to an integration after it has been created.

Start Cisco Unity Connection Administration.

Make the changes you want to the existing integration. See the 

Use the following task list to remove an existing integration.

Start Cisco Unity Connection Administration.

Delete the existing integration. See the 

.

The QSIG/DPNSS integration supports configurations of the following components:

A QSIG/DPNSS phone system.

The phone system ready for the integration as described in the installation guide for the phone 
system and the Cisco EGW 2200 documentation.

A VoIP gateway configured and connected to the QSIG/DPNSS phone system.

Cisco Unity Connection installed and ready for the integration, as described in the Cisco Unity 
Connection Installation Guide at 

A license that enables the applicable number of voice messaging ports.

A Cisco EGW 2200 ready for the integration as described in the Cisco EGW 2200 documentation.

The Cisco EGW 2200 connected to the LAN and configured for a QSIG/DPNSS backhaul signaling 
stream from the VoIP gateway.

The QSIG/DPNSS integration uses a Cisco EGW 2200, which translates QSIG or DPNSS call signaling 
into SIP, a VoIP gateway, and the LAN to connect Cisco Unity Connection and a QSIG/DPNSS phone 
system. 

 shows the required connections.