Siemens 1190 Manual De Usuario

The Remote Configuration feature allows for the remote 

configuration of the HiPath 1100.

Required: The programming extension must have a 

conversation in progress with the remote programmer.

Press this key.

>

:

Select and press to confirm.

>

:

  With a conversation in progress enter the programming 

extension code to transfer control of the HiPath 1100 to 

the remote programmer. 

The remote programmer must now enter the system’s 

password on an MF telephone (the default is 31994) 

and wait for a confirmation tone.  

To set the required configuration, proceed as if the re-

mote telephone was locally connected to the system.

If the system is equipped with a Fax/DID module pro-

grammed as an external line DID.

Enter the code using a remote MF telephone after the 

call is answered.

The remote programmer must now enter the system’s 

password on an MF telephone (the default is 31994) 

and wait for a confirmation tone. 

To set the required configuration, proceed as if the re-

mote telephone was locally connected to the system.

[1] If the system’s serial port is connected to a modem with access to 

a telephony network, and the remote PC has a modem installed, 
remote configuration can be carried out using the HiPath 1100 
Managerapplication. Ask your Support Technician how to do this.

Service Menu

If an external programmer does not carry out the 

programming within a specified time period, the 

remote configuration process times out.

oi.book  Seite 92  Mittwoch, 16. August 2006  8:41 08