Siemens 1190 Manual De Usuario

If call charges for calls made have been established, the 

system will have the ability to show the totals for the 

calls on the displays of system telephones.

The call charge is shown on the display at the end of the 

call (Standard)

If you would like to see the charges while the calls are 

in progress, ask your system’s Support Technician to re-

quest activation of the AOCD (Advice of Charge During 

the Call) facility from your local Carrier.

Depending on the Carrier, toll-free calls will also be 

shown. Before or during a call the display will read 

"FREE OF CHARGE".

When a call is transferred the call charge is assigned to 

the extension that received the transfer.

First, the total charges are displayed (total for all calls 

made). After five seconds the remaining balance is dis-

played, if the Support Technician has configured a Call 

Charge limit.

Press this key.

>

:

Select and press to confirm.

  Enter the code for activating Call Charge Consultation.

[1] Call Charge ticketing must be programmed in the system (see 

General Programming - Call Charge in the Programming Manual).

Service Menu

oi.book  Seite 95  Mittwoch, 16. August 2006  8:41 08