Snom 320 Manual De Usuario
snom technology AG • 7
[
S N O M
3 2 0 Q
U I C K
I
N S T A L L A T I O N
V 1 . 0 0 ]
1
English
1
Turn the phone upside down (Fig. 3). Please, ensure that
you do not damage the display and/or its hinge and that
you do not drop the receiver. You may want to hold the
phone in your lap or have a second person hold it.
you do not damage the display and/or its hinge and that
you do not drop the receiver. You may want to hold the
phone in your lap or have a second person hold it.
Fig. 3
Fig. 4
2
Lightly press the snap-fi ts of the footstand inwards
(Fig. 3) and, at the same time, tilt the footstand
backwards and lift it from its anchorage in the mounting
holes (Fig. 4).
(Fig. 3) and, at the same time, tilt the footstand
backwards and lift it from its anchorage in the mounting
holes (Fig. 4).
3
Rotate the footstand 180° around its vertical axis.
4
Make sure that the handset cord has been clipped
correctly into the groove on the bottom shell of the
phone, as shown in Figs. 4 and 6. Failure to clip the
cord into the groove will result in damage to the cord
when the footstand is attached in the position for wall
mounting.
correctly into the groove on the bottom shell of the
phone, as shown in Figs. 4 and 6. Failure to clip the
cord into the groove will result in damage to the cord
when the footstand is attached in the position for wall
mounting.