Toshiba IPedge IP Telephone Manual De Usuario

21

Available on backlit telephones and backlit add-on module.

1. Press 

Hold+3+6+9 (simultaneously).

2. Press the 

Mic button.

3. Press 

Hold.

4. Use table below to choose preferred settings.

5. Press 

Hold Hold to save settings

FB1 is the lower left key, FB2 in the next up, FB3 is above FB2, and FB4 
is above FB3.

IP telephones can emit a “beep” whenever a dial pad or feature button is pressed. 
The “beeps” are On by default. Follow these steps to turn the “beeps” On or Off.

1. Press 

3+6+9+Hold (simultaneously).

2. Press 

0.

3. Press 

Hold.

4. Press Programmable Feature Button 1 (FB1) to toggle On/Off.

5. FB1, LED On: buttons beep.

6. FB1, LED Off: buttons do not beep.

7. Press 

Hold to set the option.

8. You must also go off-hook, then on-hook to exit the program mode.

When you are using the speakerphone, high ambient noise levels may cause the 
party you are talking with to be to cut off frequently. If this happens, follow these 
steps to lower the sensitivity of the microphone on a IP5000-series telephone. The 
default is normal sensitivity. 

1. Press 

3+6+9+Hold (simultaneously).

2. Press 

0.

3. Press 

Hold.

4. Press Programmable Feature Button 3 (FB3) to toggle On/Off.

5. FB3, LED On: Lower sensitivity

FB1

1

Always Off

2

Always On

3

On-demand

FB2

1~30

Backlight
Timer [ x10 seconds]
Example: 1 = 10 seconds; 30 = 300 seconds.