Siemens CX253isdn Manual De Usuario

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / devices.fm / 14.11.2005

On your base station, you can register up to six cordless devices (including Gigaset data 

modules (page 123) and Gigaset Repeater (page 122)).
You must initiate registration of a cordless device on the base station and on the 

cordless device itself. The internal numbers 11 to 16 are reserved for the cordless 

devices. If these internal numbers have already been assigned on your telephone, de-

register a handset you no longer require before registering a new one (page 122).

When you have prepared the base station for registration, it remains so for approx. 

60 seconds. Therefore you should prepare the handset for registration before starting 

preparation of the base station.
1. On the base station

The base station is only ready for registration for as long as Registration 
proced.running

 is shown in the display (approx. 60 seconds).

2. On the handset (within 60 sec.)
Register the handset as described in the relevant operating instructions.
After registration the handset reverts to idle status. The handset's internal number is 

shown in the display.
The next unassigned internal number between Int.11 and Int.16 is automatically 

assigned to the handset as it is registered.

i

Open the menu.

s

Select the menu item and confirm.

s

Select the menu item and confirm.

s

Select the menu item and confirm.

s

Select the menu item and confirm.

i

If the handset terminates the base search, e.g. because the registration 

time has been exceeded, repeat the process.