Toshiba DK40I Manual De Usuario
Initialization & Test
Program 00 – Part 1: Software Check
2-14
Strata DK Programming 5/00
1111
Define the Level 1 remote maintenance security code from the System
Record Sheet (four digits maximum). Level 1 allows remote access to
all programs and data. Default Level 1 security code is “0000.”
Define the Level 1 remote maintenance security code from the System
Record Sheet (four digits maximum). Level 1 allows remote access to
all programs and data. Default Level 1 security code is “0000.”
or...
00 Select = 1
Password = 0000
1111
Define the Level 2 remote maintenance security code from the System
Record Sheet (four digits maximum). Level 2 allows remote access to
programs 30~39 and 77~89 only. Default Level 2 security code is
“0000.”
Define the Level 2 remote maintenance security code from the System
Record Sheet (four digits maximum). Level 2 allows remote access to
programs 30~39 and 77~89 only. Default Level 2 security code is
“0000.”
or...
00 Select = 2
Password = 0000
View the software RAM Checksum. This attribute can not be edited.
The default checksum may change.
or...
00 Select = 8
Sum = XXXXXXXXX
View the RPSU Power Cycle Counter. This attribute can not be edited.
The counter indicates the number of times power is removed from the
system after Program 00 was initialized via Program 90 or 91-9.
00 Select = 9
Counter = XXXX
6.
+ROG
Secure data in system programming. (Only works for “1” and “2”)
Secure data in system programming. (Only works for “1” and “2”)
00 Select = (0,1,2,8, or 9)
Data Programmed
7.
6SNU6SHDNHU
Prepare system for another selection (go back to Step 5) or exit
Program 00 (continue with Step 8).
Prepare system for another selection (go back to Step 5) or exit
Program 00 (continue with Step 8).
00 Select =
8.
+ROG
Secure Program 00 data in system memory.
Secure Program 00 data in system memory.
00 Select = ##
Data Programmed
9.
6SNU6SHDNHU
Exit Program 00. Enter another program number (see
Exit Program 00. Enter another program number (see
) or exit programming mode (go to Step 10).
System beeps to indicate it is exiting Program 00.
Program =
10.
+ROG
Exit programming mode.
Exit programming mode.
No. N-N
Jan 20 Sun
06:58
1. N-N is the Program Telephone [DN].
Action (press buttons + LED Buttons)
LCD Response