Adtran 624 Manual De Usuario

Section 4  User Interface Guide

Total Access 600 Series System Manual

 118

© 2004 ADTRAN, Inc.

61200624L1-1B

Configure the network interface bridging parameters from this menu.

The network sub-interface is PPP [0.0] if the 

 is set for 

. The [0.0] represents the network 

physical and logical ports respectively. This is a read-only field. The network sub-interface is 

 if 

the 

 is set for 

. The [0.X] represents the network physical and logical ports 

respectively. The network physical port is always 0. The X represents the Frame Relay logical port and 
will be a number between 0-6 corresponding to the interface number under 

. This is a read-only field.

Configure the Ethernet Bridging parameters from this menu.

This is a read-only field which displays the physical and logical port of the interface using the following 
nomenclature: [A.B], where A represents the physical port (network interface is 0, Ethernet is 1) and B 
represents the logical port for the Layer 2 protocol (i.e. PVC for Frame Relay, PPP link, etc.) Each 
configured logical port is assigned a number corresponding to the order in which they are listed in the L2 
Protocol configuration fields.

Configure the bridge table parameters from this menu.

 

 is how soon an entry ages out of the Bridge table (in minutes). Default is 

.

View the bridging statistics from this menu.

View the bridge table status from this menu.

Ethernet address for device learned. This is a read-only field.