Linksys SPA932 Manual De Usuario
Linksys SPA9x2 Phone Administration Guide
114
Setting Up the SPA932 Sidecar
Using the SPA932 Sidecar
)
The following table describes SPA932 LED colors.
.
Setting Up the SPA932 Sidecar
To configure the server to use the SPA932, configure each extension that will be monitored
by the SPA932. The SPA932 is a SIP subscriber in relation to each SIP proxy server, which
allows the SPA932 to receive NOTIFY messages from the SIP proxy that indicate the status of
each monitored phone. In general, the SIP proxy is identified by its IP address, or through a
hostname if DNS is configured. The way in which each phone and extension is identified is
vendor-specific.
To set up the SPA932 sidecar:
by the SPA932. The SPA932 is a SIP subscriber in relation to each SIP proxy server, which
allows the SPA932 to receive NOTIFY messages from the SIP proxy that indicate the status of
each monitored phone. In general, the SIP proxy is identified by its IP address, or through a
hostname if DNS is configured. The way in which each phone and extension is identified is
vendor-specific.
To set up the SPA932 sidecar:
Port/LED
Meaning
AUX IN
Connects to the SPA962
AUX OUT
Connects to a second SPA932 unit (optional)
Green
Idle
Red
In-use
Blinking Red
Ringing
Orange
Solid: not registered. Blinking: configuration error.
Off
Not configured