Linksys SPA932 Manual De Usuario

Linksys SPA9x2 Phone Administration Guide

143

SIT3 Tone 

Alternative to the Reorder Tone played when an error 
occurs as a caller makes an outbound call. The RSC to 
trigger this tone is configurable on the SIP screen. 

Defaults to 914@-16,1371@-16,1777@-16;20(.380/0/
1,.380/0/2,.380/0/3,0/4/0)

SIT4 Tone 

This is an alternative to the Reorder Tone played when 
an error occurs as a caller makes an outbound call. The 
RSC to trigger this tone is configurable on the SIP screen. 

Defaults to 985@-16,1371@-16,1777@-16;20(.380/0/
1,.274/0/2,.380/0/3,0/4/0).

MWI Dial Tone 

Played instead of the Dial Tone when there are unheard 
messages in the caller’s mailbox. 

Defaults to 350@-19,440@-19;2(.1/.1/1+2);10(*/0/1+2).

Cfwd Dial Tone 

Played when all calls are forwarded. 

Defaults to 350@-19,440@-19;2(.2/.2/1+2);10(*/0/1+2).

Holding Tone

Informs the local caller that the far end has placed the 
call on hold. 

Defaults to 600@-19*(.1/.1/1,.1/.1/1,.1/9.5/1).

Conference Tone 

Played to all parties when a three-way conference call is 
in progress. 

Defaults to 350@-19;20(.1/.1/1,.1/9.7/1).

Secure Call Indication Tone

Played when a call has been successfully switched to 
secure mode. It should be played only for a short while 
(less than 30 seconds) and at a reduced level (less than -
19 dBm) so it does not interfere with the conversation. 

Defaults to 397@-19,507@-19;15(0/2/0,.2/.1/1,.1/2.1/2).

Page Tone

Specifies the tone transmitted when the paging feature 
is enabled.

Defaults to 600@-16;.3(.05/0.05/1).

Alert Tone

Played when an alert occurs.

Defaults to 600@-19;.2(.05/0.05/1).

Parameter

Description