Radio Shack TAD-725 Manual De Usuario

12

1. Set 

 to 

(tone).

2. Lift the handset and listen for a dial

tone.

Press any number other than 

.

Note: If your phone system requires
that you dial an access code (9, for
example) before you dial an outside
number, do not press the access
code number either.

If the dial tone stops, you have
touch-tone service. Leave 

 set to 

.

If the dial tone continues, you have
pulse service. Set 

 to 

(pulse).

3. Press 

 or place the handset on

the base to hang up.

To turn off the base’s ringer, set 

on the back of the base to 

. You can

still make or receive calls using this
phone. Telephones on the same line

and the TAD’s handset still ring when
there is an incoming call.

Note: When the base’s ringer is turned
off and the handset is in its cradle, the
phone does not ring. If the handset is
not in the cradle, the phone rings.

To turn on the base’s ringer, set 

to 

.

You can select one of four different ring-
er tone/volume settings while the phone
is not in the talk mode.

Press 

 to advance to the next

ringer level setting.

43-725.fm  Page 12  Tuesday, February 23, 1999  2:47 PM