Radio Shack TAD-725 Manual De Usuario

15

To make a call, lift the handset. The
TALK/BATT indicator on the handset
and CHARGE/IN USE indicator on the
base light. Dial the number. 

To answer a call, just lift the handset
from the base. If the handset is away
from the base, press 

  to  make  or

answer a call. 

To end a call, place the handset on the
base or press 

.

The phone scans 40 channels (frequen-
cy pairs used between the base and the
handset) and automatically selects a
clear channel each time you make or re-
ceive a call.

If you hear other conversations or exces-
sive noise during a call, press 

 to se-

lect a different channel. The TALK/BATT
indicator blinks, and the handset beeps,

followed by a brief pause as your phone
searches for a clear channel.

Note: If the handset is too far from the
base, the channel might not change.
Move closer to the base and try again.

To change the volume you hear through
the handset, press 

during a

call. The handset volume has two set-
tings, high or low.

To answer a call using the speaker-
phone, press 

. The SPEAKER

indicator lights.

43-725.fm  Page 15  Tuesday, February 23, 1999  2:47 PM