Panasonic KX-UT113 Manual De Usuario

Network

Configure the basic network settings.
If you select DHCP, you must then
select whether the DNS setting is
configured automatically or
manually. If you select STATIC, you
must manually specify the IP
address, subnet mask, default
gateway, and DNS servers.

DHCP, STATIC

—

DNS (DHCP only)

Select whether the DNS server
information should be obtained
automatically (i.e., provided by the
DHCP server) or if you will specify it
manually.
If you select Manual, see "DNS1" and
"DNS2" below.

Manual, Automatic

Automatic

IP address

only)

Enter the IP address to assign to the
unit.

xxx.xxx.xxx.xxx

—

(STATIC only)

Enter the subnet mask for your
network.

xxx.xxx.xxx.xxx

—

(STATIC only)

Enter the IP address of the default
gateway for your network.

xxx.xxx.xxx.xxx

—

DNS1

Manual DNS)

Enter the IP address of the primary
DNS server.

xxx.xxx.xxx.xxx

—

DNS2

Manual DNS)

Enter the IP address of the
secondary DNS server.
If a secondary DNS server is not
required, leave this item blank.

xxx.xxx.xxx.xxx

—

VLAN

Configure the VLAN (Virtual LAN)
settings.

—

—

Enable VLAN

Select whether to enable the VLAN
functionality.

Yes, No

No

IP Phone

Specify the necessary settings for
using the phone features over a
VLAN.

—

—

VLAN ID

Specify the VLAN ID.

1–4094

2

Priority

Specify the priority of packets sent
from this unit.

0–7

7

PC (KX-UT123/
KX-UT133/KX-UT136
only)

Specify the necessary settings for
using a PC over a VLAN.

—

—

Document Version  2011-06  

Operating Instructions

43