Panasonic KX-UTG300 Manual De Usuario

Specifies the maximum delay, in 10-millisecond units, of the jitter buffer.

3–50 (

´ 10 ms)

•

This setting is subject to the following conditions:

–

This value must be greater than [Initial Delay]

–

This value must be greater than [Minimum Delay]

–

[Initial Delay] must be greater than or equal to [Minimum
Delay]

20 (

´ 10 ms)

Specifies the minimum delay, in 10-millisecond units, of the jitter buffer.

1 or 2 (

´ 10 ms)

•

This setting is subject to the following conditions:

–

This value must be less than or equal to [Initial Delay]

–

This value must be less than [Maximum Delay]

–

[Maximum Delay] must be greater than [Initial Delay]

2 (

´ 10 ms)

Specifies the initial delay, in 10-millisecond units, of the jitter buffer.

1–7 (

´ 10 ms)

•

This setting is subject to the following conditions:

–

This value must be greater than or equal to [Minimum
Delay]

–

This value must be less than [Maximum Delay]

2 (

´ 10 ms)

122

Administrator Guide

Document Version  2014-05