Panasonic KX-TG9381T Manual De Usuario
Useful Information
54
For assistance, please visit http://www.panasonic.com/help
Programmable settings
Battery recharge
Making/answering calls, intercom
Problem
Cause/solution
The display is in a language I
cannot read.
cannot read.
L
Change the display language (page 16).
While programming, the unit starts
to ring.
to ring.
L
A call is being received. Answer the call and start again after
hanging up.
hanging up.
I cannot register a handset to a
base unit.
base unit.
L
The maximum number of handsets (6) is already registered to
the base unit. Cancel unused handset registrations from the
base unit (page 33).
the base unit. Cancel unused handset registrations from the
base unit (page 33).
L
Place the handset and the base unit away from other electrical
appliances.
appliances.
Problem
Cause/solution
The handset beeps and/or 3
flashes.
flashes.
L
Battery charge is low. Fully charge the batteries (page 12).
I fully charged the batteries, but
3
3
still flashes or 4 is
displayed.
L
Clean the charge contacts and charge again (page 12).
L
It is time to replace the batteries (page 12).
I fully charged the batteries, but
the operating time seems to be
shorter.
the operating time seems to be
shorter.
L
Clean the battery ends (S, T) and the charge contacts with a
dry cloth and charge again.
dry cloth and charge again.
Problem
Cause/solution
w
is flashing.
L
The handset is too far from the base unit. Move closer.
L
The base unit’s AC adaptor is not properly connected.
Reconnect AC adaptor to the base unit.
Reconnect AC adaptor to the base unit.
L
You are using the handset or base unit in an area with high
electrical interference. Re-position the base unit and use the
handset away from sources of interference.
electrical interference. Re-position the base unit and use the
handset away from sources of interference.
L
The handset is not registered to the base unit. Register it (page
33).
33).
Noise is heard, sound cuts in and
out.
out.
L
You are using the handset or base unit in an area with high
electrical interference. Re-position the base unit and use the
handset away from sources of interference.
electrical interference. Re-position the base unit and use the
handset away from sources of interference.
L
If you are using the handset and base unit near a cellular
phone, move the cellular phone at least 0.6 m (2 feet) away
from them to prevent electrical interference.
phone, move the cellular phone at least 0.6 m (2 feet) away
from them to prevent electrical interference.
L
Move closer to the base unit.
L
If you use a DSL/ADSL service, we recommend connecting a
DSL/ADSL filter between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for details.
DSL/ADSL filter between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for details.
The handset and/or base unit
does not ring.
does not ring.
L
The ringer volume is turned off. Adjust the ringer volume (page
19).
19).
L
Night mode is turned on. Turn it off (page 32).
TG938x(e).book Page 54 Friday, July 3, 2009 10:10 AM