Panasonic KX-TVS80 Manual De Usuario
7.2
UTILITY COMMANDS
SYSTEM MAINTENANCE AND TROUBLESHOOTING
135
Type OFLN, then Press RETURN. If no VPS ports are in use, the VPS will immediately
suspend the call progressing service.
suspend the call progressing service.
If any VPS port is in use, the VPS will display the following warning:
The VPS will be in the Off-Line Mode when the following message is displayed.
7.2.2
On-line Set (ONLN)
The ONLN command is used to place the VPS in the Call Progressing Mode.
Type ONLN, then Press RETURN.
7.2.3
Set Password (PASS)
The PASS command is used to create, change and clear system passwords. Valid passwords are
created using up to 8 characters; any alphanumeric character, [ (space)], [.] and [_] can be used.
created using up to 8 characters; any alphanumeric character, [ (space)], [.] and [_] can be used.
1.
Type PASS, then Press RETURN.
2.
To create a password or change an existing password, go to Step 3.
To clear a password, go to Step 4.
To clear a password, go to Step 4.
3.
To create a password or change an existing password:
a) Type [1] or [2]
Note
When you press [2] to change the System Reset/Clear password you should
type the current (OLD) password before entering a new one.
type the current (OLD) password before entering a new one.
b) Type the password.
$ OFLN
** OFF LINE MODE **
** OFF LINE MODE **
*** Now line is used!! *** <WAIT>
** OFF LINE MODE **
$ ONLN
** ON LINE MODE **
** ON LINE MODE **
$ PASS
1: Administrator Password 2: System Reset/Clear Password :=
1: Administrator Password 2: System Reset/Clear Password :=
Maximum 8 characters
NEW PASSWORD : =
NEW PASSWORD : =