Panasonic KX-UTG200 Manual De Usuario
Default Value
Auto Negotiation
4.3.4.2 LLDP Settings
Enable LLDP
Description
Selects whether to enable or disable sending and receiving LLDP
frames.
frames.
Note
•
You should specify "Yes" for only one of "LLDP", "VLAN" or
"IEEE802.1X".
"IEEE802.1X".
•
If "Yes" is specified for two or more of the parameters above,
the settings are prioritized as follows: "IEEE802.1X" >
"VLAN" > "LLDP". Therefore, if "Yes" is specified for both
"VLAN" and "LLDP", the VLAN-related settings are used.
the settings are prioritized as follows: "IEEE802.1X" >
"VLAN" > "LLDP". Therefore, if "Yes" is specified for both
"VLAN" and "LLDP", the VLAN-related settings are used.
Value Range
•
Yes
•
No
Default Value
No
Configuration File Reference
LLDP-MED Interval Timer
Description
Specifies the interval, in seconds, between sending each LLDP frame.
Value Range
5–3600
Default Value
30
Configuration File Reference
4.3.4.3 CDP Settings
Enable CDP
Description
Enables or disables CDP.
Value Range
•
Yes
•
No
Default Value
No
Configuration File Reference
CDP Interval timer
Description
Specifies the time between CDP messages.
90
Administrator Guide
Document Version 2014-05
4.3.4 Ethernet Port Settings