Panasonic KX-TG2583NZS Manual De Usuario

9

Press 

FWD/EDIT (É)

(Save key).

•The unit announces the day/time. The clock starts working.

•If 6 beeps sound, the setting is not correct. Start again from step 5.

•To return to the standby mode, press (FUNCTION/EXIT/CH).

•In step 7, you cannot enter numbers greater than 12. Do not use 24 hour clock

time. (To set 13:00 hours, enter “0100”, and select “PM” by pressing (*).)

If a power failure occurs, the adjusted day/time will be erased. Readjust
the day/time.

(p. 30)

•The Caller ID information will re-set the clock after the first ring if the adjusted

time is incorrect. However, the day will not be re-set. Set the day following the
procedures on pages 20 and 21.

•If the time has not previously been set, the Caller ID information will not adjust

the clock.

•The Caller ID information will automatically adjust the clock for daylight saving

time.