Panasonic KX-TG4381AL Manual De Usuario

Descargar
Página de 52
Useful Information
43
Battery recharge
Making/answering calls, intercom
*1 KX-TG4391/KX-TG4392/KX-TG4393/KX-TG4394
Problem
Cause/solution
The handset beeps and/or 
7
 flashes.
L
Battery charge is low. Fully charge the 
batteries (page 14).
I fully charged the batteries, but 
7
 still flashes or 8 is 
displayed.
L
Clean the charge contacts and charge again 
(page 14).
L
It is time to replace the batteries (page 13).
I fully charged the batteries, but 
the operating time seems to be 
shorter.
L
Clean the battery ends (S, T) and the 
charge contacts with a dry cloth, and charge 
again.
Problem
Cause/solution
Noise is heard, sound cuts in 
and out.
L
You are using the handset or base unit in an 
area with high electrical interference. Place 
the base unit and use the handset away from 
sources of interference.
L
Move closer to the base unit.
L
If you use a DSL/ADSL service, we 
recommend connecting a filter (contact your 
DSL/ADSL service provider) to the telephone 
line between the base unit and the telephone 
line socket. Contact your DSL/ADSL provider 
for details.
The handset does not ring.
L
The ringer volume is turned off. Adjust the 
ringer volume (page 23).
L
Night mode is turned on. Turn it off (page 25).
The base unit does not ring.
L
The ringer volume is turned off. Adjust the 
ringer volume (page 17).
I cannot make a call.
L
The handset is too far from the base unit. 
Move closer and try again.
L
If the above remedy does not solve the 
problem, set the dialling mode. Press 
{
MENU} {#} {1} {2} {0} {Save} {OFF}.
L
The unit is not designed to be used with 
rotary/pulse dialling services.
TG43xxAL(e)_OI.book  Page 43  Friday, May 23, 2008  3:51 PM