Panasonic KX-TG5212 Manual De Usuario

If the handset display shows error messages, see “If the Following Appear on 
Your Display...” (p. 71–72) for the Cause & Remedy.

“No link to base.
Move closer to
base and try
again.” is displayed and an 
alarm tone sounds.

• The handset has lost communication with the 

base unit. Walk closer to the base unit, and 
try again.

• Confirm the base unit’s AC adaptor is 

plugged in.

• Raise the base unit antennas.
• The handset’s registration may have been 

canceled. Re-register the handset (p. 69, 70).

Static, sound cuts in/out, 
fades. Interference from other 
electrical units.

• Move the handset and base unit away from 

other electrical appliances (p. 6).

• Walk closer to the base unit.
• Raise the base unit antennas.
• Turn on the Clarity Booster feature (p. 28).

The handset does not ring.

• The ringer volume is turned off. Set to high, 

medium, or low (p. 20).

• If more than one other user is using the 

handset and/or base unit, the handset may 
not ring. Users will hear incoming call tones 
(p. 50).

The handset display is blank.

• If the handset display is blank, fully charge 

the battery (p. 13).

You cannot program any 
function items.

• Programming is not possible while the 

handset and/or base unit is being used.

• Do not pause for over 60 seconds while 

programming.

• Walk closer to the base unit.
• While another user is listening to messages 

or the Answering System is handling a call, 
you cannot program. Try again later.

While programming or 
searching, the handset starts 
to ring and the program/
search stops.

• A call is coming in. To answer the call, press 

C

] or [s]. Start again from the beginning 

after hanging up.