Panasonic KX-TGP500 Manual De Usuario

Y

13

When a call is being received, the ringer indicator 
on the handset flashes rapidly. The last 4 digits of 
the line number on which the call is being received 
are displayed.

Lift the handset and press {CALL}, {C}, or 
{s}

 when the unit rings.

L

You can also answer the call by pressing 
any dial key from {0} to {9}, {*}, or {#}. 
(Any key answer feature)

When you finish talking, press {OFF} or place 
the handset on the charger.

Note:
L

If the auto talk feature is turned off (page 13), 
you can select which line answers when more 
than one call is being received:
{

CALL} i {V}/{^}: Select the desired line. 

i

 Press {CALL}, {C}, or {s}.

L

If y is displayed during the call, other units may 
join the conversation (page 14, 18). Contact 
your administrator for further information.

You can answer calls simply by lifting the handset 
off the charger. You do not need to press {CALL} 
or {C}. To turn this feature on, see page 27.

■ While the handset is ringing for an incoming 

call:
Push the joystick up or down repeatedly to 
select the desired volume.

■ Programming the volume beforehand:

{

MENU} (center of joystick) i 

{#}{

1}{6}{0}

{V}

/{^}: Select the desired volume.

{

SAVE} i {OFF}

While the handset is ringing for a call, you can turn 
the ringer off temporarily by pressing {~}.

This feature allows you to put an outside call on 
hold.

Press {HOLD} during an outside call.

To release hold, press {HOLD} or {C}.

Note:
L

If a call is kept on hold for more than 9 minutes, 
an alarm tone starts to sound and the ringer 
indicator on the handset flashes. If the outside 
party hangs up the call, the unit disconnects the 
line and goes into standby mode.

You can make a call using the other line by holding 
the 1st call.

Press {HOLD} to put the 1st call on hold.

Dial the phone number. i {CALL}

To return to the 1st call, press {SWITCH}.

While mute is turned on, you can hear the other 
party, but the other party cannot hear you.

Press {MUTE} during an outside call.

To return to the conversation, press {MUTE} 
again.

Note:
L {

MUTE} is a soft key visible on the display 

during a call.