Panasonic KX-TGP500 Manual De Usuario

:

38

{

EXIT}

{

MENU} (middle soft key) i {#}{2}{1}{7}

{V}

/{^}: Select the desired entry.

L

To exit, press {EXIT}.

Proceed with the desired operation.
■ Editing a number:

{

MENU} i {V}/{^}: “Edit” i 

{

SELECT} i Edit the phone number. i 

{

SAVE} i {EXIT}

■ Erasing a number:

{

MENU} i {V}/{^}: “Erase” i 

{

SELECT} i {V}/{^}: “Yes” i 

{

SELECT} i {EXIT}

Note:
L

When editing, press the desired dial key to add, 
{

CLEAR} to erase.

This feature allows the unit to make a call 
anonymously.
The default setting is “Off”.
Important:
L

We recommend setting with your administrator. 
Contact your administrator for further 
information.

{

MENU} (middle soft key)

{V}

/{^}: “IP service” i {SELECT}

{V}

/{^}: “Call features” i {SELECT}

{V}

/{^}: “Block Caller ID” i 

{

SELECT}

Proceed with the desired operation.
■ When 1 line is registered:

Go to step 6.

■ When 2 or more lines are registered:

{V}

/{^}: Select the desired line. i 

{

SELECT}

{V}

/{^}: Select “On” or “Off”. i {SAVE} 

i

 {EXIT}

Set if the unit does not show the date and time. You 
can set the date and time through the Web user 
interface and also program it to adjust 
automatically using the SNTP. Also daylight saving 
time setting is available through the Web user 
interface. Contact your administrator for further 
information.

{

MENU} (middle soft key) i {#}{1}{0}{1}

Enter the current month, date, and year.
Example: March 15, 2010
{

0}{3} {1}{5} {1}{0}

Enter the current hour and minute (12-hour 
clock format).
Example: 9:30
{

0}{9} {3}{0}

{

AM/PM}: Select “AM” or “PM”.

{

SAVE} i {EXIT}

Note:
L

When English is selected as the display 
language, 12-hour clock format is used. When 
Spanish is selected, 24-hour clock format is 
used.

L

To correct a digit, press {<}, {>}, {^}, or {V} to 
move the cursor to the digit, then make the 
correction.

Your phone system dealer may offer new features 
and improve its software version from time to time. 
If you set the base unit software update setting to 
manual mode through the Web user interface, you 
need to download the update when “Update 
version.Press OK.” is displayed. Contact your 
administrator for further information.
Important:
L

Make sure the STATUS indicator on the base 
unit is lit in green and no line is in use (page 8).

Press {OKL} while “Update 
version.Press OK.” is displayed.
L

The current and new base unit software 
versions are displayed.