Panasonic KX-TG2750S Manual De Usuario

We recommend you press [REDIAL/PAUSE] on the base unit or [PAUSE/REDIAL] 
on the cordless handset if a pause is required for dialing with a PBX or to make a 
long distance call.

Ex. Line access number [9] (PBX)

[9] 

 [REDIAL/PAUSE] or [PAUSE/REDIAL] 

 

• Pressing [REDIAL/PAUSE] or [PAUSE/REDIAL] once creates a 3.5 second 

pause. This prevents misdialing when you redial or dial a stored number.

• Pressing [REDIAL/PAUSE] or [PAUSE/REDIAL] more than once increases the 

length of the pause between numbers.

During an intercom call or while using the Room Monitor feature, you can be 
informed by two tones if a call arrives. 
If you set incoming call tone to ON, this incoming call tone will be heard for as long 
as the line rings. To bypass the incoming call tone, set it to OFF. To set the incoming 
call tone to sound twice, set to “2”. The factory preset is “2”.
You can set the incoming call tone on the base unit or the cordless handset 
separately.

• You can also set the incoming call tone for the base unit, by using the cordless 

handset. Perform the following steps:
(1) Press [CONF/FUNCTION]. 
(2) Scroll to “Initial setting” by pressing [ ] or [ ], then press [ ].
(3) Scroll to “Set base unit” by pressing [ ] or [ ], then press [ ].
(4) Press [ ] at “Incoming call”.
(5) Select “On”, “Off” or “2” by pressing [ ] or [ ], press the soft key (

), 

and press [OFF].

Base unit: Press [FUNCTION/EDIT].

Cordless handset: Press [CONF/FUNCTION]

.

Scroll to “Ringer setting” by pressing 
[ ] or [ ], then press [ ].

Scroll to “Incoming call” by pressing [ ] 
or [ ], then press [ ].

Select “On”, “Off” or “2” by pressing [ ] or 
[ ].

Base unit: Press [ ] (Save), then press [EXIT]. 

Cordless handset: Press the soft key (

), then press [OFF].

Phone number

▼

Ringer setting

▼

Incoming call

Incoming call

       tone :2

▼

▼

▼

▼