Panasonic KX-TS4200 Manual De Usuario
Multi-unit Operation
40
For assistance, please visit http://www.panasonic.com/phonehelp
Room monitor
You can monitor a room using the
intercom feature. For example, you can
monitor a baby from different areas of
the house.
To use this feature, turn auto mute off at
the destination extension.
intercom feature. For example, you can
monitor a baby from different areas of
the house.
To use this feature, turn auto mute off at
the destination extension.
Important:
L
L
Turn auto mute off at the destination
extension (see “Turning auto mute on/
off ” on page 39).
extension (see “Turning auto mute on/
off ” on page 39).
L
Make sure that the destination unit is
in standby mode.
in standby mode.
1
Press {INTERCOM} 2 times.
L
L
The INTERCOM indicator lights.
L
The SP-PHONE indicator lights
and the speakerphone turns on.
and the speakerphone turns on.
2
Press the speed dial (extension)
button or enter the extension
number.
L
button or enter the extension
number.
L
The destination extension does not
ring, instead it will beep 3 times.
ring, instead it will beep 3 times.
L
Your unit starts to monitor the room
through the extension.
through the extension.
L
If necessary, you can mute your
sound output by pressing
{
sound output by pressing
{
MUTE}.
3
To end monitoring, press
{
{
SP-PHONE} or place the handset
on the cradle.
Note:
L
L
To avoid being monitored and keep
privacy, turn Do Not Disturb (DND) on.
privacy, turn Do Not Disturb (DND) on.
L
The monitored extension user can
stop being monitored by pressing
{
stop being monitored by pressing
{
SP-PHONE} or {INTERCOM}.
Transferring calls
You can transfer an outside call to
another extension.
The speed dial (extension) buttons “1,
2, 3...15, 16” mean the extension
numbers “11, 12, 13...25, 26”.
another extension.
The speed dial (extension) buttons “1,
2, 3...15, 16” mean the extension
numbers “11, 12, 13...25, 26”.
Blind transfer
1
During an outside call, press
{
{
TRANSFER} to put the call on hold.
2
Press the speed dial (extension)
button or enter the extension
number, then place the handset on
the cradle.
L
button or enter the extension
number, then place the handset on
the cradle.
L
If the transferred extension does
not answer within 1 minute, the
transferred call will ring at all
extensions.
not answer within 1 minute, the
transferred call will ring at all
extensions.
Note:
L
L
Any extensions can take a transferred
call by pressing the relevant line
button.
call by pressing the relevant line
button.
L
If a call is kept on hold for more than
60 or 120 seconds, an alarm tone
starts to sound (hold reminder). To
turn off the hold reminder, see “Hold
reminder” on page 29.
60 or 120 seconds, an alarm tone
starts to sound (hold reminder). To
turn off the hold reminder, see “Hold
reminder” on page 29.
L
If a call is kept on hold for more than 5
minutes, the call is disconnected.
minutes, the call is disconnected.
Paging before transfer
1
During an outside call, press
{
{
INTERCOM} 2 times to put the call
on hold.
L
L
You can make an intercom call by
pressing {INTERCOM}.
pressing {INTERCOM}.
2
Press the speed dial (extension)
button or enter the extension
number.
L
button or enter the extension
number.
L
If the paged extension does not
answer, press the relevant line
button.
answer, press the relevant line
button.
KXT4200_OI.book Page 40 Friday, September 1, 2006 8:53 AM