Panasonic KX-TS4200 Manual De Usuario
Caller ID Service
44
For assistance, please visit http://www.panasonic.com/phonehelp
–If the phone number is 10 digits, “1”
is automatically inserted and display
before the phone number.
before the phone number.
–If the phone number is less than 10
digits, only the phone number is
displayed.
displayed.
Example:
Home area code is set to “999”.
Local area code is set to “888”.
–When a number from “999” area code
Home area code is set to “999”.
Local area code is set to “888”.
–When a number from “999” area code
is received (for example, “999-xxx-
xxxx”), it displays as a 7-digit number.
xxxx”), it displays as a 7-digit number.
–When a number from “888” (set to one
of the local area codes) area code is
received (for example, “888-xxx-xxxx”),
it displays as a 10-digit number.
received (for example, “888-xxx-xxxx”),
it displays as a 10-digit number.
–When a number from “333” (not set to
the local area code) area code is
received (for example, “333-xxx-xxxx”),
it displays as a 11-digit number.
received (for example, “333-xxx-xxxx”),
it displays as a 11-digit number.
Note:
L
L
If you are in a region where 10 digits
are used to dial within your area code,
you are advised to set the home area
code to “000” and you must set your
area code as a local area code.
are used to dial within your area code,
you are advised to set the home area
code to “000” and you must set your
area code as a local area code.
L
To edit a caller’s phone number, see
“Editing a caller’s phone number
before calling back” on page 45.
“Editing a caller’s phone number
before calling back” on page 45.
Automatically setting date and time
This phone automatically resets the date
and time each time new information is
received. You can set the date and time
yourself if you wish (see “Date and time”
on page 24).
This phone automatically resets the date
and time each time new information is
received. You can set the date and time
yourself if you wish (see “Date and time”
on page 24).
Caller list
Viewing the caller list
Important:
L
L
Make sure that the unit is in standby
mode.
mode.
1
Press {CALLER ID}.
2
Press {V} to search from the most
recent call, or {^} to search from the
oldest call.
recent call, or {^} to search from the
oldest call.
3
To exit the list, press {CALLER ID}.
Note:
L
L
To return to the previous menu, press
{<}
{<}
.
Calling back from the caller
list
list
Important:
L
L
Make sure that the unit is in standby
mode.
mode.
1
Press {CALLER ID}.
2
Press {V} to search from the most
recent call, or {^} to search from the
oldest call.
recent call, or {^} to search from the
oldest call.
3
Press {MENU/SET}.
L
L
If the number requires editing, see
“Editing a caller’s phone number
before calling back” on page 45.
“Editing a caller’s phone number
before calling back” on page 45.
4
Select “Dial Alternate” (or
“Dial”), then press {MENU/SET}.
L
“Dial”), then press {MENU/SET}.
L
If you want to select a desired line
and dial out, press the line button.
and dial out, press the line button.
Note:
L
L
To return to the previous menu, press
{<}
{<}
.
xxx-xxxx
888-xxx-xxxx
1-333-xxx-xxxx
KXT4200_OI.book Page 44 Friday, September 1, 2006 8:53 AM