Panasonic KX-TS4100 Manual De Usuario
Useful Information
For assistance, please visit http://www.panasonic.com/phonehelp
49
Troubleshooting
General use
Problem
Cause/solution
The unit does not
work.
work.
L
Check the connections (page 14, 15, 16, 17).
L
Unplug the AC adaptor to reset the unit.
Reconnect the adaptor and try again.
Reconnect the adaptor and try again.
The line indicators do
not work properly.
not work properly.
L
Check the connections (page 14, 15, 16, 17).
The unit does not
ring.
ring.
L
The ringer is set to “Off”. Turn it on (see “Turning ringer
on/off ” on page 26).
on/off ” on page 26).
L
The Do Not Disturb (DND) feature is turned on. Turn it off
(see “Turning Do Not Disturb (DND) on/off” on page 27).
(see “Turning Do Not Disturb (DND) on/off” on page 27).
L
If there are several non-system phones on the line that do
not ring, disconnect some of them. Having too many
phones connected can also result in low ringer volumes
on non-system phones.
not ring, disconnect some of them. Having too many
phones connected can also result in low ringer volumes
on non-system phones.
You cannot hear a
dial tone.
dial tone.
L
Check the connections (see “Connecting the handset and
AC adaptor” on page 14).
AC adaptor” on page 14).
L
Confirm the telephone line cord is properly connected
(page 15, 16, 17).
(page 15, 16, 17).
L
Disconnect the unit from the telephone line and connect a
known working telephone. If the working telephone
operates properly, contact our service personnel to have
the unit repaired. If the working telephone does not
operate properly, contact your telephone service provider.
known working telephone. If the working telephone
operates properly, contact our service personnel to have
the unit repaired. If the working telephone does not
operate properly, contact your telephone service provider.
Date and time on the
display flashes.
display flashes.
L
Set the date and time (see “Date and time” on page 24).
You cannot dial.
L
Check whether the dialing mode selection is correct (see
“Dialing mode” on page 24).
“Dialing mode” on page 24).
The battery is
discharged.
discharged.
L
Please remove the battery when you cut the power
supply, as the battery will discharge automatically once
the power is cut according to the time shown on page 12.
supply, as the battery will discharge automatically once
the power is cut according to the time shown on page 12.
How do I return to
standby mode
quickly?
standby mode
quickly?
L
Lift the handset, then place it back on the cradle.
L
Press {SP-PHONE} 2 times.
KXT4100_OI.book Page 49 Friday, September 1, 2006 8:54 AM