Panasonic KX-TG4500B Manual De Usuario

For assistance, please visit http://www.panasonic.com/phonehelp

103

The unit does not work.

L

Check the settings (pages 73, 75 and 76).

L

Press {RESET} on the bottom of the base unit with a 
pointed object (page 99).

The cordless handset 
does not work.

L

Charge the battery fully (page 16).

L

Clean the charge contacts and charge again (pages 16 
and 21).

L

Install the battery properly (page 16).

L

Re-install the battery and place the cordless handset on 
the charger (page 16). Try again.

L

The cordless handset has not been registered to the 
base unit. Register the cordless handset (page 25).

L

After inserting the battery, press {OFF}.

The cordless handset 
display shows “No link 
to the base. Please 
walk closer to the 
base and try again”.

L

The cordless handset has lost communication with the 
base unit. Move closer to the base unit, and try again.

L

Raise the base unit antenna.

L

If the above remedies do not solve the problem, the 
cordless handset may have lost communication with 
the base unit. Register the cordless handset again 
(page 25).

The line indicators do not 
work properly.

L

Check the settings (pages 73, 75 and 76).

L

The line mode selection is incorrect (page 25).

You cannot have a 
conversation using the 
headset.

L

Make sure that the headset is properly plugged into the 
headset jack on the cordless handset (page 98) or base 
unit (page 97).

I cannot register a 
cordless handset to the 
base unit.

L

Fully charge the battery (page 16).

L

A cordless handset cannot be registered if there are 
already eight registered cordless handsets.

I cannot have a 
conversation using the 
cordless handset when 
the headset is connected.

L

When the headset is connected (page 98) to the 
cordless handset, you must use the headset to talk with 
the caller. To have a normal conversation, disconnect 
the headset.