Panasonic KX-THA11 Manual De Usuario
Preparation
For assistance, please visit http://www.panasonic.com/phonehelp
9
Setting up the handset
Connecting the AC adaptor
L
Use only the included Panasonic AC
adaptor PQLV203.
adaptor PQLV203.
Note:
L
The AC adaptor must remain connected
at all times. (It is normal for the adaptor
to feel warm during use.)
at all times. (It is normal for the adaptor
to feel warm during use.)
L
The AC adaptor should be connected to
a vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to
a ceiling-mounted AC outlet, as the
weight of the adaptor may cause it to
become disconnected.
a vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to
a ceiling-mounted AC outlet, as the
weight of the adaptor may cause it to
become disconnected.
Battery installation
Insert the battery (
A), and press it down
until it snaps into the compartment (
B).
Then close the handset cover.
Battery charge
Place the handset on the charger for 4
hours before initial use.
While charging, the CHARGE indicator on
the charger lights. When the battery is fully
charged, “Charge completed” is
displayed.
hours before initial use.
While charging, the CHARGE indicator on
the charger lights. When the battery is fully
charged, “Charge completed” is
displayed.
Note:
L
If you want to use the handset
immediately, charge the battery for at
least 15 minutes.
immediately, charge the battery for at
least 15 minutes.
L
To ensure that the battery charges
properly, clean the charge contacts of
the handset and charger with a soft, dry
cloth once a month. Clean more often if
the unit is subject to grease, dust, or
high humidity.
properly, clean the charge contacts of
the handset and charger with a soft, dry
cloth once a month. Clean more often if
the unit is subject to grease, dust, or
high humidity.
Battery strength
Note:
L
When the battery needs to be charged,
the handset beeps intermittently while it
is in use.
the handset beeps intermittently while it
is in use.
(120 V AC,
60 Hz)
60 Hz)
A
B
Battery icon
Battery strength
1
Fully charged or high
2
Medium
3
Low
Flashing: needs to be
recharged.
Flashing: needs to be
recharged.
4
Discharged
THA11.book Page 9 Tuesday, March 7, 2006 5:56 PM