Panasonic KX-TG6502 Manual De Usuario

You can set the handset and base unit ringers to use one of 8 ringer patterns for 
each line. “Tone 1” to “Tone 4” are bell ringer patterns. “Melody 1” to “Melody 4” are 
melody patterns. LINE 1 is preset to “Tone 1”. LINE 2 is preset to “Tone 2”.
• You cannot change the ringer tone for intercom calls.
• If you subscribe to a Distinctive Ring Service (such as IDENTA-RING) from your 

telephone company with 2 or 3 consecutive rings, select a bell ringer pattern (Tone 
1 to 4). If you select a melody pattern, you will not be able to distinguish lines by 
their ringers.

• If you select one of the melody ringer patterns, the ringer will continue to sound for 

several seconds if:
— the caller hangs up before you answer the call, or
— another person answers the call using another phone connected on the same line.

• If LINE 1 and LINE 2 have different ringer patterns and both lines receive calls 

simultaneously, both ringers will ring alternately.

Press [MENU].

Scroll to “Ringer setting” by pressing 

[d] or [B], then press the soft key (

).

Scroll to “Ringer tone” by pressing [d] or 
[B], then press the soft key (

).

Press [d] (Line1) or [B] (Line2) to select 

the line. 

Select the desired ringer tone by pressing 
[d] or [B].

• The handset will ring and the ringer tone will 

change. If the ringer volume has been turned off, 
the handset will not ring.

• You can also select the ringer tone by pressing [1] to [8].

[1] to [4]: Bell ringer patterns         
[5] to [8]: Melody patterns

To adjust the ringer volume, press the soft key (

). Adjust the 

ringer volume by pressing [d] or [B]. See “Handset ringer volume” 
on page 24, step 5.

Press the soft key (

).

• To select the other line, repeat from step 3.

Press [OFF].

Ringer setting

Ringer tone

Ringer tone

d

=Line1  

B

=Line2

 

Ringer tone

   

L1

1:Tone

 

1

dB

 

 

TG6500.book  Page 26  Friday, June 25, 2004  6:56 PM