Panasonic KX-TG6502 Manual De Usuario

N

When the handset is not in use, you can also turn this feature on or off by 
performing the following steps:

1. Press [MENU] while the handset is not in use.
2. Scroll to “Voice enhancer” by pressing [d] or [B], then press the soft key 

(

).

3. Select “On” or “Off” by pressing [d] or [B].
4. Press the soft key (

), then press [OFF].

• To switch to the handset while using the base unit speakerphone:

— If the handset is off the base unit, press the line soft key (

) or (

) on 

the handset, then press [SP-PHONE] on the base unit.

— If the handset is on the base unit, just lift up.

• The line buttons show the status of each line (p. 38).

To increase volume, press [B]. To decrease volume, press [d].

• There are 8 volume levels. If you try to increase/decrease volume when it is at the 

maximum/minimum level, the base unit beeps 3 times. The level is displayed on 
the base unit.

Press [SP-PHONE].

• The SP-PHONE indicator lights.
• A free line is automatically selected 

and the line button lights. (To change 
the line selection, see page 70.)

• You can select a line by pressing a 

line button that does not light, instead 
of pressing [SP-PHONE].

Dial a phone number.

• If you misdial, press [SP-PHONE] 

and start again from step 1.

When the other party answers, talk 

into the MIC (microphone).

To hang up, press [SP-PHONE].

• The SP-PHONE indicator and line 

button lights go out.

For best performance, please note the following:
• Talk alternately with the other party in a quiet room.
• If you or the other party has difficulty hearing, press [d] to decrease the 

speaker volume.

[B], [d]

[SP-PHONE] and Indicator

LINE Buttons

TG6500.book  Page 37  Friday, June 25, 2004  6:56 PM