Panasonic KX-TG6502 Manual De Usuario

 

The base unit user can make a voice announcement that is heard through the 
speakers of all handsets.
• When 4 handsets are registered to the base unit, and if one handset user is on 

conversation using the Booster feature, one of the remaining 3 handsets will not 
receive the voice announcement.

• Only the handset user who answers first can talk with the base unit user.
• To answer the page from the handsets, see “Answering Intercom Calls” on 

page 56.

• If a handset is too close to the base unit, you may hear feedback while making the 

voice announcement. Place the handset on the base unit or charger (for 
KX-TG6502 or accessory handset users, p. 3) or press [OFF].

• It is not possible to specify which handset(s) will hear the voice announcement.
• The speaker volume for the announcement follows the higher ringer volume level 

of 2 lines on the handset (p. 24).

Press [LOCATOR/INTERCOM/TRANSFER].

• The LOCATOR/INTERCOM/TRANSFER and SP-PHONE indicators light.

To make a voice announcement to all handsets, press [5]  (

).

• You will hear a ringback tone (2 short beeps) and the SP-PHONE indicator 

flashes.

When the SP-PHONE indicator stops flashing, speak into the MIC.

• All handset users will hear your voice through their speakers after beeps, 

“Call from Base” will be displayed and the Ringer/Message Alert 
indicator will flash rapidly on the handsets.

• The handset on the base unit will not be paged.

When finished, press [SP-PHONE] or [LOCATOR/INTERCOM/
TRANSFER].
OR
After one of the handsets answers, talk into the MIC.
To disconnect the intercom, press [SP-PHONE] or
[LOCATOR/INTERCOM/TRANSFER].

TG6500.book  Page 57  Friday, June 25, 2004  6:56 PM