Panasonic KX-TG6702 Manual De Usuario

24

For assistance, please visit http://www.panasonic.com/phonehelp

Changing the ringer tone
You can change the base unit ringer tone 
heard when an outside call is received. 
There are 4 tones and 4 melodies.

Press {LINE SELECT} repeatedly to 
select the desired line when in standby 
mode.

L

You cannot set the ringer tone for 
both lines at the same time.

Within 10 seconds, press {<} or {>} 
repeatedly to select the desired ringer 
tone.

L

To stop ringing, press {STOP}.

L

If you subscribe to a distinctive ring 
service (such as IDENTA-RING), select 
a tone (Tone 1 to 4). If you select a 
melody, you will not be able to 
distinguish lines by their ringers.

L

If you select one of the melody ringer 
patterns, the ringer will continue to 
sound for several seconds if:
– the caller hangs up before you answer 

the call.

– another person answers the call using 

another phone connected on the 
same line.

HOLD button
This feature allows you to put an outside 
call on hold.

Press {HOLD} during an outside call.

L

To transfer the call to the base unit or 
another handset, continue from step 
2, “Transferring calls”, page 50.

Press {HOLD} again.

L

To release the hold, press {LINE1} or 
{

LINE2} that is flashing on the 

handset.

Press {HOLD} during an outside call.

L

To release the hold, press {LINE1} or 
{

LINE2} that is flashing on the base unit.

L

If another phone is connected to the 
same line (page 10), you can also take 
the call by lifting its handset.

L

If a call is kept on hold for more than 6 
minutes, an alarm tone starts to sound. 
After 4 additional minutes on hold, the 
call is disconnected.

TG6700.book  Page 24  Monday, April 24, 2006  10:28 AM