Panasonic KX-TG5240M Manual De Usuario

Wrong handset
Refer to manual

• This handset is not for this base unit. This handset is 

for KX-TG6500 base unit. The accessory handsets 
for this base unit are KX-TGA520 and KX-TGA523. 
To order, see page 3.

“No link to base.
Move closer to
base and try
again.

” is displayed and an 

alarm tone sounds.

• The handset has lost communication with the base 

unit. Walk closer to the base unit, and try again.

• Confirm the base unit’s AC adaptor is plugged in.
• Raise the base unit antennas.
• The handset’s registration may have been 

canceled. Re-register the handset (p. 80, 81).

Static, sound cuts in/out, 
fades. Interference from other 
electrical units.

• Move the handset and base unit away from 

other electrical appliances (p. 6).

• Walk closer to the base unit.
• Raise the base unit antennas.
• Turn on the Clarity Booster feature (p. 29).
• If the unit is connected to a telephone line with 

DSL service, you may hear noise from the 
receiver or speaker during conversations. We 
recommend connecting a noise filter (contact 
your DSL service provider) to the telephone line 
between the unit and the telephone line jack.

The base unit and/or handset 
does not ring.

• The ringer volume is turned off. Set to high, 

medium, or low (p. 20, 21).

• If more than one other user is using the handset 

and/or base unit, the handset/base unit may not 
ring. Users will hear incoming call tones (p. 59).

The handset display is blank.

• If the handset display is blank, fully charge 

the battery (p. 13).

You cannot program any 
function items.

• Programming is not possible while the 

handset and/or base unit is being used.

• Do not pause for over 60 seconds while programming.
• Walk closer to the base unit.
• While another user is listening to messages 

or the Answering System is handling a call, 
you cannot program. Try again later.

TG5240.fm  Page 84  Wednesday, September 22, 2004  3:45 PM