Panasonic KX-TC1170ALN Manual De Usuario
One-Touch Dialler
Base Unit
48
Storing Phone Numbers in Memory
You can store up to 3 phone numbers in the one-touch auto dial buttons.
Do not press any one-touch auto dial buttons before storing to prevent
misoperation.
misoperation.
1
Press
(FUNCTION/EDIT)
on the base
unit.
2
While “
SAVE AUTO# ?” is displayed,
press
OK
.
3
Enter a phone number up to 22 digits.
• If you enter a wrong number, press
(CLEAR)
and enter the correct
number.
4
Press one of the one-touch auto dial
buttons (
buttons (
(M1)
,
(M2)
or
(M3)
).
(Ex.
(M1)
is pressed.)
• A beep sounds.
• To store other numbers, repeat steps
2 through 4.
• To return to the standby mode, press
(EXIT)
.
You cannot access any numbers stored in a portable unit from the base
unit.
Make sure that the base unit and portable unit are in the standby mode.
unit.
Make sure that the base unit and portable unit are in the standby mode.
To erase a stored number
1. Press
(FUNCTION/EDIT)
on the base unit.
2. Press
OK
.
3. Press one of the one-touch auto dial buttons (
(M1)
,
(M2)
or
(M3)
)
required.
• A beep sounds.
• If a pause is required for dialling,
(REDIAL/PAUSE)
can be stored in a
phone number counting as one digit (p. 62) in step 3.
• You can exit the programming mode any time by pressing
(EXIT)
.
11:34
AM
11/25
SAVE AUTO# ?
11:34
AM
11/25
ENTER PHONE NO.
11:34
AM
11/25
1234567890
AUTO OR M# =SAVE
AUTO OR M# =SAVE
11:34
AM
11/25
1234567890
SAVE IN M1
SAVE IN M1