Panasonic KX-TG8100E Manual De Usuario
Preparation
11
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
Battery strength
Panasonic Ni-MH battery performance
(included batteries)
(included batteries)
Note:
L
It is normal for batteries not to reach full
capacity at the initial charge. Maximum
battery performance is reached after a few
complete cycles of charge/discharge
(use).
capacity at the initial charge. Maximum
battery performance is reached after a few
complete cycles of charge/discharge
(use).
L
Actual battery performance depends on a
combination of how often the handset is in
use and how often it is not in use
(standby).
combination of how often the handset is in
use and how often it is not in use
(standby).
L
Battery operating time may be shortened
over time depending on usage conditions
and ambient temperature.
over time depending on usage conditions
and ambient temperature.
L
Even after the handset is fully charged,
the handset can be left on the base unit or
charger without any ill effect on the
batteries.
the handset can be left on the base unit or
charger without any ill effect on the
batteries.
L
The battery strength may not be displayed
correctly after you replace the batteries. In
this case, place the handset on the base
unit or charger and charge for at least 7
hours.
correctly after you replace the batteries. In
this case, place the handset on the base
unit or charger and charge for at least 7
hours.
Screen saver mode
The backlight will turn off completely
after 1 minute of inactivity if the handset is
not on the base unit or charger.
To use the handset when it is in screen
saver mode, first press {ih} to turn the
display on again.
after 1 minute of inactivity if the handset is
not on the base unit or charger.
To use the handset when it is in screen
saver mode, first press {ih} to turn the
display on again.
Turning the power on/off
Power on
Press {ih} for about 1 second.
Power off
Press {ih} for about 2 seconds.
Symbols used in these
operating instructions
operating instructions
Battery icon
Battery strength
1
High
2
Medium
3
Low
When flashing: Needs
to be charged.
When flashing: Needs
to be charged.
Operation
Operating time
In continuous use
12 hours max.
In continuous
standby mode
standby mode
150 hours max.
Symbol
Meaning
"
Press " (middle soft key).
i
Proceed to the next operation.
#
Press # (middle soft key).
j
X
K
X
K
I
N
L
M
Select the mentioned handset
menu icon (page 8).
Example:
menu icon (page 8).
Example:
N (handset setup
menu icon)
Select
Select
N by pressing {^}, {V},
{<}
, or {>}.
“ ”
Select the words in quotations
shown on the display (e.g.,
“Time Settings”) by
pressing {^} or {V}.
shown on the display (e.g.,
“Time Settings”) by
pressing {^} or {V}.
*1 KX-TG8100 and KX-TG8102 only
*2 KX-TG8120 and KX-TG8122 only
*2 KX-TG8120 and KX-TG8122 only
TG8100-8120E(e).book Page 11 Friday, March 3, 2006 10:34 AM