Panasonic KX-TA624 Manual De Usuario

2-14

Allows you to assign a Flexible button (CO, DSS, MESSAGE, PF) as a One-Touch
Dialing button.

— Be sure that you are in the Station Programming mode. Set the MEMORY switch to

“PROGRAM”.

Press the desired Flexible button you wish to 
assign as a One-Touch Dialing button and dial 2, 
or press the desired PF button.

Press STORE.

AUTO DIAL

STORE

Enter the desired number 
(extension number, 
phone number, etc.).

No.

CO

MESSAGE

PF

)

(

+

• The STORE indicator lights.
• The display shows the initial

programming mode.

Not Stored

• Up to 24 digits can be stored.
• To erase an incorrect entry, press the TRANSFER (CLEAR) button.

(The TRANSFER button becomes the CLEAR button during programming.)

— To exit the Station Programming mode, set the MEMORY switch to “SET”

• The number can be an extension number, telephone number or feature number. Up to

twenty-four digits can be stored in a One-Touch Dialing button.

• To store the telephone number of an external party, a line access code (9 or 81 through

86) must be stored as the first digit.

• You can store a number consisting of twenty-five digits or more by dividing and

assigning it into two One-Touch Dialing buttons. In this case, the line access code
should be stored in the first button.

• To store an account code, press 

and then enter the desired code. The account

codes must be stored after the line access code.

• You can use 0 through 9,

, #, PAUSE and INTERCOM for storing.

#:

change the dialing mode (Pulse to Tone)

PAUSE:

pause

INTERCOM:

secret