Panasonic KX-TCD715NLM Manual De Usuario
For Optional Multi-Unit Users
62
2
Selecting specified handset(s)
You can choose which handset(s) you want to ring.
1
Press .
2
Press
or
until the arrow points
to “
Setting Base
”, then press
.
•
“
Input Command
” is displayed.
3
Press .
4
Enter the 4-digit base unit PIN (p. 55).
•
The current setting is displayed.
1: All handsets
2: Specified handset(s)
3: First handset
1: All handsets
2: Specified handset(s)
3: First handset
5
Press .
•
The current registered handset number(s)
is/are displayed.
is/are displayed.
2
1
Bell Selection
There are three choices for bell selection.
When a call is being received:
— all handsets ring. “All handsets”
— the selected handset(s) ring(s). “Specified handset(s)”
— the selected handset rings first, then if it does not answer, all other handsets will ring. “First
When a call is being received:
— all handsets ring. “All handsets”
— the selected handset(s) ring(s). “Specified handset(s)”
— the selected handset rings first, then if it does not answer, all other handsets will ring. “First
handset”
The factory preset is “All handsets”. To change the bell selection, program as follows.
Make sure that the power is ON (p. 11) and the unit is in the standby mode.
6
Enter the handset number(s) you want to
ring.
ring.
•
The selected handset number(s) flash(es).
•
If you misdial, press the number(s) again.
7
Press .
•
A beep sounds.
•
To return to the standby mode, press
.
I n p u t C o m m a n d
1 2 - 1 2 3 4 5 6
TCD715NLM(E)-8Multi 01.9.17 8:22 PM Page 62