Panasonic KX-TG1840AL Manual De Usuario
SMS (Short Message Service)
46
3
Edit the number, then press {C} or
{s}
{s}
.
Guide to SMS settings
If the base unit is reset to its default settings
(page 38), the following SMS-related
settings will be reset.
(page 38), the following SMS-related
settings will be reset.
Note:
L
If the base unit is reset to its default
settings, the contents of the receive and
send lists will be erased.
settings, the contents of the receive and
send lists will be erased.
Creating private mailboxes
Private mailboxes can be used for sending
and receiving SMS messages. Each private
mailbox is password protected.
and receiving SMS messages. Each private
mailbox is password protected.
1
Press {j/OK}.
2
Select “SMS”, then press {>}.
3
Select “Public”, then press {>}.
4
Select “Settings”, then press {>}.
5
Enter “0000” (default base unit PIN).
L
L
If you changed the PIN, enter it (page
38).
38).
6
Select “Private Mailbox”, then
press {>}.
press {>}.
7
Select the desired new mailbox number
(“Mailbox1” to “Mailbox6”), then
press {>}.
(“Mailbox1” to “Mailbox6”), then
press {>}.
8
/OK}.
9
Enter a 4-digit password for the mailbox,
then press {j/OK}.
then press {j/OK}.
10
Select “Save”, then press {>}.
11
Press {ih}.
Note:
L
To receive SMS messages using a
mailbox, inform others of your mailbox
number.
mailbox, inform others of your mailbox
number.
Changing private mailbox
settings
settings
You can change the password or name of
the private mailbox and erase the mailbox.
the private mailbox and erase the mailbox.
1
Press {j/OK}.
2
Select “SMS”, then press {>}.
3
Select “Public”, then press {>}.
4
Select “Settings”, then press {>}.
5
Enter “0000” (default base unit PIN).
L
L
If you changed the PIN, enter it (page
38).
38).
6
Select “Private Mailbox”, then
press {>}.
press {>}.
7
Select the desired mailbox name, then
press {>} 2 times.
press {>} 2 times.
8
Enter the mailbox’s 4-digit password.
9
Edit the mailbox name (5 characters
max., page 48), then press {j/OK}.
max., page 48), then press {j/OK}.
L
To erase the mailbox, press and hold
{
{
C/T}, press {j/OK}, select “Yes”,
press {>}, then press {ih} to
finish.
finish.
10
Enter a 4-digit password for the mailbox,
then press {j/OK}.
then press {j/OK}.
11
Select “Save”, then press {>}.
12
Press {ih}.
SMS settings
Page
SMS on/off (default: “On”)
Message Centre 1
Message Centre 2
Private mailboxes
(default: —)
(default: —)
PBX line access number
(default: “Off”)
(default: “Off”)
TG1840AL(e-e).book Page 46 Tuesday, April 11, 2006 11:02 AM