Panasonic KX-TCD700AL Manual De Usuario

11

6cm

6cm

WALL TEMPLATE

If you are satisfied with the operation of your
telephone service after plugging in your
Permitted Attachment, your installation is
complete.
You will be unable to connect this Permitted
Attachment if your telephone service consists
only of a wall phone or an old style telephone
which is not connected by means of a modern
plug and socket. In such cases a new socket
will need to be installed.
Should the Permited Attachment not operate
when plugged into a socket, it is either faulty or
unsuitable for operation with your telephone
service. It should be returned to the store where
purchased or the Authorised Service Centre.

If at any time a fault occurs on your telephone

service carry out the following checks before
you call for service:

• Disconnect the Permitted Attachments and try

using the service with the normal telephone.

• If the telephone service then operates

satisfactorily, the fault is in your Permitted
Attachment. Leave the Permitted Attachement
disconnected and report the fault to its
supplier or agent to arrange for repair.

• If when using the telephone the service is still

faulty, report the fault to “Service Difficulties
and Faults” for attention.

You are required to keep this Permitted
Attachment in good working order while it is
connected to your telephone service. Its
construction or internal circuit must not be
modified in any way without permission.

This unit can be mounted on a wall.

• Install screws using the wall template on page.
• Connect the line cord, and AC Adaptor.
• Arrange the wires as shown, then mount the unit.

700al  australian 2 5 02  2/5/02  3:00 pm  Page 11