Panasonic KX-TCD700AL Manual De Usuario

50

The unit does not work.

• Turn the power ON (p.14).
• Check the settings.
• Charge the batteries fully (p.9).
• Clean the charge contacts and charge again (p.9).
• Unplug the AC adaptor and turn the power OFF to

reset. Plug in the AC adaptor and turn the power
ON. Then try again.

• The handset has been cancelled or has not been

registered. Register the handset (p.38).

• Re-install the handset batteries and try again.

“Δ flashes and an alarm tone 

• You are too far from the base unit. Move closer and

sounds when you Z O.

• 

try again.

• Plug in the AC adaptor.

A busy tone sounds when you

• Another handset is in use.

Z O

.

You cannot dial.

• The unit is in call prohibition mode. Cancel the mode

(p.35).

• The dialled number is restricted. Cancel the number

(p.45).

• Key lock mode is set. Cancel the mode (p.28).

“Δ flashes during a conversation

• The handset is out of range. Move closer to the 

and the call is disconnected.

• 

base unit and make the call again.

• Plug in the AC adaptor.

Static, sound cuts in/out, fades.

• Locate the handset and base unit away from other

Interference from other electrical 

• 

electrical appliances.

units.

• Move closer to the base unit.

The handset does not ring.

• Turn the power ON (p.14).
• The ringer is set to OFF. Select the desired volume

level (p.31).

The base unit does not ring.

• The ringer is set to OFF. Set to HIGH, MEDIUM or

LOW (p.46).

You cannot program function items

• Programming is not possible while the unit is in the

such as the handset ringer volume.

• 

talk or intercom mode.

• Do not pause for over 60 seconds while

programming.

You cannot store a phone number

• You cannot store a phone number while the unit is 

in memory.

• 

in the talk or intercom mode.

• Do not pause for over 60 seconds while storing.

700al  australian 2 5 02  2/5/02  3:00 pm  Page 50