Panasonic KX-TD1232C Manual De Usuario
Station Features and Operation (DPT/SLT)
146
User Manual
<PT>
•
The destination extension shows the Caller ID and the extension number from where the
call was transferred on the display.
<Example> The Caller ID number "123456789" is transferred from extension 101.
call was transferred on the display.
<Example> The Caller ID number "123456789" is transferred from extension 101.
The priority of the display is:
Caller ID name > Caller ID number > Outside line name > Blank (if none of these is
assigned).
If your telephone has a two, three or six line display, both the Caller ID name and number
are displayed.
Caller ID name > Caller ID number > Outside line name > Blank (if none of these is
assigned).
If your telephone has a two, three or six line display, both the Caller ID name and number
are displayed.
•
You can change the display to show the original extension number and name by System
Programming.
Programming.
•
A flexible CO button can be assigned as a DSS button.
•
To use "One-Touch Transfer", System Programming is required.
•
Pressing the FLASH button while dialing clears the display. Then you can enter the
revised number.
revised number.
•
If you want to return to the held call, press the TRANSFER button or corresponding CO,
INTERCOM button before the destination extension answers.
INTERCOM button before the destination extension answers.
•
When "Transfer Recall" occurs, the display shows:
<Example>
<Example>
<SLT>
•
If you want to return to the held call, flash the hookswitch before the destination
extension answers.
extension answers.
<ISDN Telephone>
•
This feature is not available for ISDN telephones.
Programming Guide References
[108] Automatic Hold by CO / DSS Button
[201] Transfer Recall Time
[990] System Additional Information
User Manual References
101 123456789
RCL: Ext 103