Panasonic KX-TCD961CXB Manual De Usuario
Chapter 1
Preparation
13
- i-
Turning the Power ON
To turn the power OFF, press and hold
until a beep sounds.
•
The display will go blank.
•
The handset will not ring.
•
Depending on the programming mode, you
may not be able to turn the power off. First
make sure the handset is set to the stand-by
mode.
may not be able to turn the power off. First
make sure the handset is set to the stand-by
mode.
•
You can choose whether to display the base
unit number, handset number or no display in
the stand-by mode by programming (p. 51).
unit number, handset number or no display in
the stand-by mode by programming (p. 51).
Press firmly.
•
After all possible configurations briefly appear,
the display will change to the following. Then
the handset is in the stand-by mode.
The current connected base unit number is
displayed.
the display will change to the following. Then
the handset is in the stand-by mode.
The current connected base unit number is
displayed.
1
Press then .
2
Press .
3
Enter the base unit password.
•
The factory preset is 0000. To change the
base unit password, see page 29.
base unit password, see page 29.
4
Press .
•
The current mode is displayed.
1: Tone
1: Tone
2: Pulse
1
3
I N T
Selecting the Dialing Mode
You can program the dialing mode to tone or pulse. If you have touch tone service, set to tone. If rotary
or pulse service is used, set to pulse. The factory preset is tone.
Make sure that the power is ON and the unit is in the stand-by mode.
or pulse service is used, set to pulse. The factory preset is tone.
Make sure that the power is ON and the unit is in the stand-by mode.
5
To select Pulse, press
.
OR
To select Tone, press
To select Tone, press
.
6
Press .
•
A confirmation tone sounds and the
display will return to the stand-by mode.
display will return to the stand-by mode.
1
2
•
If 5 beeps sound in step 3, the entered
password is incorrect. Enter the correct
password.
password is incorrect. Enter the correct
password.
•
To cancel during programming, press
,
then start from step 1.
3
o
- - - -
KX-TCD961CXB(06~16) 99.12.3 2:04 PM Page 13