Panasonic KX-TCD961CXB Manual De Usuario
Preparation
Chapter 1
21
Setting the Greeting Monitor Function
When your greeting message is being played to the caller, you can listen to it through the base unit
speaker. To listen to your greeting, set to 2 (ON). The factory preset is 1 (OFF).
speaker. To listen to your greeting, set to 2 (ON). The factory preset is 1 (OFF).
1
Press then .
2
Press .
•
“
” is displayed on the handset.
•
“P” is displayed on the base unit.
3
Press .
•
The current setting, “1” or “2”, is displayed
on the base unit.
on the base unit.
4
I N T
4
To set to ON, press
.
OR
To set to OFF, press
To set to OFF, press
.
•
The setting is displayed.
5
Press .
1
2
Selecting the Number of Rings
You can select the number of times the unit rings before the answering system answers a call, from 2
to 7 or AUTO (for Toll Saver*). The factory preset is AUTO.
to 7 or AUTO (for Toll Saver*). The factory preset is AUTO.
*Toll Saver
(When set to “AUTO”)
When you call the unit from a touch tone
telephone:
If the unit answers on the 2nd ring, there is at
least one new message.
If the unit answers on the 5th ring, there are
no new messages.
Hang up when you hear the 3rd ring.This
will save you the toll charge for the call.
telephone:
If the unit answers on the 2nd ring, there is at
least one new message.
If the unit answers on the 5th ring, there are
no new messages.
Hang up when you hear the 3rd ring.This
will save you the toll charge for the call.
1
Press then .
2
Press .
•
“
” is displayed on the handset.
•
“P” is displayed on the base unit.
3
Press .
•
The current setting is displayed on the
base unit.
base unit.
4
Press dialing button
or
to
to set the number of rings.
0:
Selects “AUTO”.“A” is displayed.
2-7: The unit will answer after the selected
number of rings.
7
2
0
2
I N T
5
Press .
KX-TCD961CXB(17~21) 99.12.3 2:06 PM Page 21